| It is currently 07 Sep 2010, 11:23 |
|
All times are UTC + 10 hours |
  |
Page 1 of 2 |
[ 36 posts ] | Go to page 1, 2 Next |
| Previous topic | Next topic |
Tools and workstands available
| Author | Message |
|---|---|
|
Sheep!    Joined: 24 Mar 2006, 21:47 Posts: 14453 Location: Sydenham, Melbourne Name: Trev 
|
 Tools and workstands availableHere is a list and pictures of the tools and other items that are currently available:
HSP BRAND WORKSTANDS - $29 These workstands have a rotating table on top, magnetic strip on the side and also plenty of spaces to store screws along all sides. These are great to use on any car that is 1:10 or 1:8 scale. 
HSP Brand Body Reamer $30 
HSP Brand Body Scissors $8 
HSP Brand Hex Drivers (set of 4) Perfect sizes for all HSP cars $35 
 _________________ The Plaig Store is now open PM's disabled, Contact me here. My Youtube Videos here  Australia Team Driver
|
| 26 Oct 2006, 21:24 |
   |
|
|
|
Sheep.   Joined: 04 Apr 2006, 01:30 Posts: 7604 Location: At the feet of the Goddess that is Kasey Name: Craig
|
I can vouch for the quality of almost all of these items. The only one I don't own is the body reamer.
And this bit of the stand is designed to hold your shocks while rebuilding/refilling them.
Cache Ya, Craig. _________________  We win the finish! Even a bad day at the track beats a good day at work! -331017960
|
| 26 Oct 2006, 22:04 |
|
|
|
|
Sheep! Joined: 24 Mar 2006, 21:47 Posts: 14453 Location: Sydenham, Melbourne Name: Trev
|
Well there ya go!
you learn something new everyday, thanks for that Craig! _________________ The Plaig Store is now open PM's disabled, Contact me here. My Youtube Videos here Australia Team Driver
|
| 26 Oct 2006, 22:08 |
|
|
|
|
UNLEASHED  Joined: 30 Jun 2006, 23:39 Posts: 2919 Location: Melbourne, Hoppers Crossing Name: Amo
|
Hey Trev would the Savage fit on one of those stands ???
_________________ Savage 3 speed-Infinity 32R-Z TG 10-NovaRossi CX 12-2 speed Fully optioned Cen MG 16 MT Fixed !! KM Baja 28.5cc spektrum Lynx 3d Blade SR R.I.P Dad 1931 - 2009 |
| 26 Oct 2006, 23:34 |
|
|
|
|
Sheep! Joined: 24 Mar 2006, 21:47 Posts: 14453 Location: Sydenham, Melbourne Name: Trev
|
I am pretty sure it will, you might have to raise it slightly, I have worked on a few Tornados which are the HSP 1:8 Trucks and that was ok.
_________________ The Plaig Store is now open PM's disabled, Contact me here. My Youtube Videos here Australia Team Driver
|
| 26 Oct 2006, 23:38 |
|
|
|
|
Sheep. Joined: 04 Apr 2006, 01:30 Posts: 7604 Location: At the feet of the Goddess that is Kasey Name: Craig
|
Amo,
I've set my stand up to it's highest to accomodate the Hyper and it's 90mm from the benchtop. I'm sure the Savvy will fit on it. Cache Ya, Craig. _________________ We win the finish! Even a bad day at the track beats a good day at work! -331017960
|
| 27 Oct 2006, 12:58 |
|
|
|
|
Gold Member   Joined: 05 Jun 2006, 19:03 Posts: 1145 Location: Wodonga
|
Not to sound stupid but what is a body reamer and wtf does it do???
_________________ ATOMIC WARHEAD TRUGGY PORTED.18 ALLOY ALL ROUND. UPGRADED TO THE MAX BAZOOKA - .21 3 CLAW MOD SPECKTRUM DX 3.0 |
| 27 Oct 2006, 19:24 |
|
|
|
 Joined: 27 Mar 2006, 17:51 Posts: 4509 Location: Newcastle Name: Kelby
|
it is a body reamer it makes holes in the lexen shell you could use it to ream something else but might bleed a bit
 _________________ OFNA - Ravager RTR, Samurai .21 HPI - Savage X SS 4.6, .28 SH p6 pro spec HPI - R40 2005, LRP .12 spec 2 Soon addition Hsp B1 pro  
|
| 27 Oct 2006, 19:27 |
|
|
|
|
Gold Member Joined: 05 Jun 2006, 19:03 Posts: 1145 Location: Wodonga
|
how does it work do you just puch it in where you need to make a hole or what?????
_________________ ATOMIC WARHEAD TRUGGY PORTED.18 ALLOY ALL ROUND. UPGRADED TO THE MAX BAZOOKA - .21 3 CLAW MOD SPECKTRUM DX 3.0 |
| 27 Oct 2006, 19:45 |
|
|
|
|
Gold Member  Joined: 05 May 2006, 12:07 Posts: 3995 Location: Sydney,NSW Name: Rob
|
it works something like a drill, the more you twist it and push down the bigger the hole
_________________ I am the "Dark Angel of Death" The time for purification is at hand The Grim Reaper is my doer of deeds 
|
| 27 Oct 2006, 20:21 |
|
|
|
 Joined: 18 Mar 2007, 22:05 Posts: 2336 Location: Phillip Island
|
Hey trev got any of these in stock?
|
| 23 Mar 2007, 20:32 |
|
|
|
|
Joined: 27 Mar 2006, 17:51 Posts: 4509 Location: Newcastle Name: Kelby
|
i might grab a work stand for my onroad
 should be building it tomorrow _________________ OFNA - Ravager RTR, Samurai .21 HPI - Savage X SS 4.6, .28 SH p6 pro spec HPI - R40 2005, LRP .12 spec 2 Soon addition Hsp B1 pro
|
| 23 Mar 2007, 21:52 |
|
|
|
|
Sheep! Joined: 24 Mar 2006, 21:47 Posts: 14453 Location: Sydenham, Melbourne Name: Trev
|
I've got everything except the workstands at the moment, I should have more next week I think.
_________________ The Plaig Store is now open PM's disabled, Contact me here. My Youtube Videos here Australia Team Driver
|
| 23 Mar 2007, 22:01 |
|
|
|
|
Joined: 18 Mar 2007, 22:05 Posts: 2336 Location: Phillip Island
|
ok no probs trev i will grab one of u then!
|
| 23 Mar 2007, 22:05 |
|
|
|
|
Joined: 27 Mar 2006, 17:51 Posts: 4509 Location: Newcastle Name: Kelby
|
you BETTER!!!!
dont force me to buy it some where else yet if i place in the picture comp might not have to buy it  is that sand paper on the top??? will i have to get onto HSP for scratching my lovely new chassis _________________ OFNA - Ravager RTR, Samurai .21 HPI - Savage X SS 4.6, .28 SH p6 pro spec HPI - R40 2005, LRP .12 spec 2 Soon addition Hsp B1 pro
|
| 23 Mar 2007, 22:10 |
|
|
|
|
Sheep. Joined: 04 Apr 2006, 01:30 Posts: 7604 Location: At the feet of the Goddess that is Kasey Name: Craig
|
No, it's not sandpaper. It's 3mm neoprene and your car will sit nicely on it.
Cache Ya, Craig. _________________ We win the finish! Even a bad day at the track beats a good day at work! -331017960
|
| 23 Mar 2007, 22:53 |
|
|
|
|
Sheep! Joined: 24 Mar 2006, 21:47 Posts: 14453 Location: Sydenham, Melbourne Name: Trev
|
Funnily enough the guys at Massive Mods have one of my workstands and commented on the quality
_________________ The Plaig Store is now open PM's disabled, Contact me here. My Youtube Videos here Australia Team Driver
|
| 23 Mar 2007, 23:28 |
|
|
|
|
Joined: 18 Mar 2007, 22:05 Posts: 2336 Location: Phillip Island
|
swwwweeeeeeet
|
| 23 Mar 2007, 23:30 |
|
|
|
|
Joined: 27 Mar 2006, 17:51 Posts: 4509 Location: Newcastle Name: Kelby
|
you need a pin trev??
j/k (still trying to get back on that pic  ) but they look the goods. foam is good lol just looks like sand paper in the picture never trust the chinese _________________ OFNA - Ravager RTR, Samurai .21 HPI - Savage X SS 4.6, .28 SH p6 pro spec HPI - R40 2005, LRP .12 spec 2 Soon addition Hsp B1 pro
|
| 23 Mar 2007, 23:44 |
|
|
|
|
Sheep! Joined: 24 Mar 2006, 21:47 Posts: 14453 Location: Sydenham, Melbourne Name: Trev
|
Haha
sorry Kelby._________________ The Plaig Store is now open PM's disabled, Contact me here. My Youtube Videos here Australia Team Driver
|
| 24 Mar 2007, 00:00 |
|
|
|
Page 1 of 2 |
[ 36 posts ] | Go to page 1, 2 Next |
|
All times are UTC + 10 hours |
Who is online |
Users browsing this forum: No registered users and 0 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum |